Is this kit bolt in? Yes, this kit is a direct bolt in no welding kit.

Does this kit lift my truck? Yes, your truck will have approximately 4" of lift. 

What does this kit fit? 

• 1980-1997 F250
• 1980-1997 F350

Kit Includes:

• 2" Rear Shackle Flip
• Conversion Boomerang Shackle
• Front Spring Hanger
• Ebrake Bracket
• Hardware Pack

Installation Instructions  

Notes from Sky Manufacturing

There are many variations of these springs out there.  We have used the 2 Leaf pack version and gained 4" of lift which eliminated the factory block.  The truck sat level with a 2" Front Shackle Reversal.  When using the 3 or 4 leaf packs you will potentially gain more lift than the advertised 4".

You need the whole kit to complete the swap and keep the correct suspension geometry.  We only made this an option for those that already have the 2" shackle flip and/or boomerang shackle.

Ebrake bracket is intended to be weld on to your specific application, it does have 2 pilot holes in case you want to drill larger holes and run bolts in a location you choose.

If you have a standard cab truck you will have to slide the front tank over to be able to get behind the frame to drill the necessary holes and install bracket.  We installed this kit on a single cab truck, it is possible without removing fluid lines off of the inside of the frame.

All Sky products have at least two weeks lead time.