Thumbnail Filmstrip of CNC Fabrication Stage 2 High Pressure Oil Pump Images
CNC Fabrication Stage 2 High Pressure Oil Pump
Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can be ran with this pump, but it is not a guarantee that it will keep up in a "hot/race" tune as there are variables between injector builders on how well they build them.
This pump is more recommended for 230-250cc hybrid injectors. Anything larger will more than likely require a larger pump setup.
- Comes with a new gasket
- All of CNC Fabrication's pumps are fitted with steel thread inserts to ensure the threads will not rip out
- Upgraded internals for more flow
- New Viton o-rings to reuse your existing fittings
- Every pump is flow bench tested to assure you no DOA pumps
- Comes with a test flow result sheet
This pump is more recommended for 230-250cc or smaller injectors. Anything larger will more than likely require a twin pump setup. So, if a 2 pump setup is needed, CNC Fabrication carries the twin kit from FULL FORCE DIESEL PERFORMANCE.
1994-1995 7.3L Powerstroke
1996-1997 7.3L Powerstroke
1999-2003 7.3L Powerstroke
Send in your own pump (no charge) or they can send your pump right away with a core charge until you send in your old pump. You will receive a $250 refund once you send in your old pump.