Complete Performance 80-97 OBS Ford 2wd Level Kit
2 inch Leveling Kit
This kit is designed to level your 2WD OBS out.
Features an machined aluminum spacer for precision fit and installation. The aluminum construction will not deform or deteriorate over time like other leveling kits on the market. A zinc-plated steel spring retainer stud extender is included to insure proper fit and function.
Easy to install! Even better is that you now can get the leveling lift you want all while maintaining the factory ride!
Requires Front end Alignment
1980-1997 F250-F350 2wd trucks
*** NOT TO BE USED IN CONJUNCTION WITH NEW SPRINGS***
Some Notes about Alignment
These trucks were built in the 90's, quality control was not what it is today. Each truck will require a different degree of caster/camber bushing.
The Twin I-beam suspension works great in stock form, but does not take to lifting or lowering well. 2 to 2.5 inches is all the lift or drop you can get from springs or a leveling spacer.
When using our level kit you will have to get an alignment and often times over a 2.5 degree bushing is required. From what we have found the adjustable bushings available online will not give you the degrees needed.
We do not sell the bushings at this time, it is best for the alignment shop to do this so that they get exactly the bushings they need per the measurements they get off your truck.
We have provided a Link Here to buy fixed degree bushings online in case your alignment shop is unable to get them locally
***Lastly, We have also found thought research some I-Beams have a thicker casting ridge on them than others and when installing high degree bushings the knuckle can come in to contact with said ridge. This ridge offers no structural support and can be ground smooth to allow for full range of motion.
*** We assume no responsibility of damages or loss due to suspension modification
It is an excellent idea to go ahead and upgrade to the Bilstein Shocks while your installing this level kit. It not only makes it easier for install it creates a much better ride on your truck.
Here is a link for the Rear Bilstein Shocks for the 2wd trucks also
Looks great! Keeps stock ride quality as well.
The instructions could be better like with some photos.
Fast shipping and rides like a dream I can clear 34s with a little trimming.
I was very surprised with the fact that I was able to fit 35s under the truck. I don’t have a stock front bumper and there’s no rubbing on the fenders. Just a little bit on the sway bar but still. Alignment wasnt to bad. No death wobble. Took about 2 hours. No coil compressor needed. What a great simple leveling kit.