OBS Intercooler Bracket Kit (92-97)

(1 review) Write a Review

Product Overview

OBS Solutions Intercooler Mounting Kit 

This kit is designed to ONLY work with the 1999-2003 Ford 7.3 Powerstroke OEM/Aftermarket Intercooler OR the Icebox Performance 1992-1997 F-250/350 Aluminum Intercooler.

This kit is intended to ONLY fit 1992-97 F-250/350 trucks with DIESEL engine core supports. It WILL NOT FIT a gas engine core support. You can replace your existing gas core support with a diesel unit to allow fitment of our kit onto your truck if necessary.

If you do not have OEM grommets for your intercooler you can obtain them at a local radiator shop - we DO NOT supply these in our kit!

We designed this kit to work exclusively with Obsession Diesel Performance 7.3 Powerstroke Diesel T4 Turbo Kit and Stock Turbo Piping Kit. We offer both of these kits on our website. The stock 1999-2003 Superduty 7.3 Intercooler Piping and intake spider can be used, but the piping will need to be modified to work correctly.

This bracket kit will also work with the popular Cummins, International and other diesel conversions. However, we do not offer piping solutions for those applications at this time.

Automatic Transmission Applications:

Our kit is designed to only work with the 2003-2007 Ford 6.0 Powerstroke transmission cooler. Either stock or aftermarket will fit with our brackets. We highly recommend this upgrade, so much in fact that we didn’t design our kit to use anything else. The OEM 1992-97 F-Series stock transmission cooler is inadequate and a necessary upgrade for achieving optimum performance and reliability out of your automatic transmission. We do not offer technical support for using the stock transmission cooler or any other units.


Install Instructions Here


Product Videos


(1 review) Write a Review

1 Review Hide Reviews Show Reviews

  • 5
    Awesome Kit!

    Posted by Aaron Murphy on Jan 18th 2021

    Used this kit to install a SD 7.3 intercooler and 6.0 trans cooler into my 97 Crew. Kit was perfect kit and ony had to modify 1 thing. Lower trans cooler mounts sent the top of the cooler too close to the a/c condenser for my liking. Only took about 5 mins of remounting bottom tabs. Not a big deal at all. Intercooler, trans cooler, and everything fit perfectly. Other issue was header panel touched intercooler so i had to trim a little there. Fabbed my own intercooler pipes and used a e99 intake manifold. Went together nicely and only took about 14 hours total with fab work. I had brackets all powder coated which I'm glad i did as hood latch is visible from front of truck and will hold up better than paint.