80-96 Ford F-150/Bronco 4x4 SAS Kit,
What it is:
- Leaf Spring Solid axle conversion for the 80-96 era Ford F-150 and Bronco coil sprung TTB (Twin Traction Beam) 4x4 trucks.
- Kit is designed for 36.5 or 37.5" spring perch width using 92-97 52" or 99-04 56" F-250/350 front springs.
- Can use a Dana 44 F-250 axle with spring pads moved to correct width, and converted to 5 lug f-150 outer components to keep the factory rear axle.
- Bronco F-150 will sit approximately 4" over stock height on factory stock springs.
Fairly simple, yet still some-what DIY. The front hanger will sit against the factory sway bar mounts on the frame if using 92-97 leafs. Aprx 4" forward if using Super Duty 99-04 leafs. Square it side to side and double check off rear spring bolts it is square. Verify your frame is square as well.
Measure back 50.5" and this will be where the shackle hanger eye will want to sit. Weld or bolt the shackle hangers in place. Hang shackles and start bolting the axle under.
If using the 99-04 Super Duty springs, you will need to position the front hanger 4" forward of the 92-97 spring location.