Contact Us
Based on the measurements you provided, we couldn’t match any products. Please provide your email and phone number, and we will reach out to you during business hours.
SKU:DS:BLANKET73
DIESELSITE 7.3L POWERSTROKE TURBO BLANKET
DIESELSITE 7.3L POWERSTROKE TURBO BLANKET
Powerstroke Turbo Blanket
Fitment:
** WILL NOT FIT WITH FACTORY EBV STILL IN PLACE- MUST BE DELETED**
1994-1997 TP38 stock Ford 7.3L Turbo, non-waste gated
Early 1999 GTP38 stock Ford 7.3L Turbo waste gated
1999-2003 GTP38 stock Ford 7.3L Turbo waste gated
Garrett GTP 38R PowerMax all year models
Dieselsite Wicked Turbos- All Models
- 1994-1997 OBS Wicked Turbo 60 and 66mm
- Early 1999 60 and 66mm
- 1999.5-2003 66mm
Why use a Turbo Blanket?
Turbocharger insulating has been promoted for its benefits for many years.
- Insulating the exhaust side of the turbo can increase power and decrease turbo lag.
Trapping heat in the turbine is actually a good thing. The expansion of hot gasses will cause the turbo to spool faster.
- It Decreases under-hood temperatures.
Keeping the "under the hood" temps down is always a good idea. Primarily, it allows the intake charge to stay cooler and the Inter-cooler and radiator will work more efficiently.
Lower temps mean less wear and tear from temperatures on plastics and rubbers and reduces heat transfer to the firewall and cab.
- 3.Keeping the turbo section hot will help the exhaust gases flow faster, thus reducing spool times.
In physics, dissipating heat slowly equates to wasted potential energy. Thermodynamics could explain that the more heat you retain in the system, the greater the efficiency of the turbo is.
Warning! Turbo Blanket material is made with Lava Rock fiber which can be an irritant to some people, similar to fiberglass insulation. If you have sensitive skin, please consider wearing gloves during your install.
