CNC Fabrication Stage 2 High Pressure Oil Pump

Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can be ran with this pump, but it is not a guarantee that it will keep up in a "hot/race" tune as there are variables between injector builders on how well they build them.

This pump is more recommended for 230-250cc hybrid injectors. Anything larger will more than likely require a larger pump setup. 

• Comes with a new gasket
• All of CNC Fabrication's pumps are fitted with steel thread inserts to ensure the threads will not rip out
• Upgraded internals for more flow
• New Viton o-rings to reuse your existing fittings
• Every pump is flow bench tested to assure you no DOA pumps
• Comes with a test flow result sheet

This pump is more recommended for 230-250cc or smaller injectors. Anything larger will more than likely require a twin pump setup. So, if a 2 pump setup is needed, CNC Fabrication carries the twin kit from FULL FORCE DIESEL PERFORMANCE.

Applications:

1994-1995 7.3L Powerstroke

1996-1997 7.3L Powerstroke

1999-2003 7.3L Powerstroke

**Please Read**

Send in your own pump (no charge) or they can send your pump right away with a core charge until you send in your old pump. You will receive a $300 refund once you send in your old pump.

******CORES FOR 94.5-95 HPOP MUST BE THE CORRECT HOUSING TO RECIEVE FULL CREDIT. 96-03 CORES WITHOUT THE CHECK VALVE WILL BE ACCEPTED WITH A 25% REDUCTION OF CORE REFUND.

Core Return Form

Core Return Instructions

Core Policy


**YOU HAVE 45 DAYS FROM THE DAY THE PUMP WAS RECEIVED TO GET YOUR FULL